ePrivacy and GPDR Cookie Consent by Cookie Consent
Close

Knowledge Base : Bandsaw Blade Pulls to One Side When Cutting

There are three main reasons for this happening:

1. The blade itself has lost its set on the teeth. By replacing the blade with a good quality blade this problem will be overcome. Losing the set off a blade unfortunately is common when cutting re-claimed timber and the only way to remedy the problem is to replace the blade.

2. The blade is worn and no longer sharp, again by replacing the blade with a good quality blade this problem will be overcome.

3. If the blade however is in perfect condition then the most probable cause is that the blade is undertensioned.

Return to Product Support